The Helipad is fully wireless, full status security keypad delivering several firsts to the security industry. The Helipad is the first touch pad to use a supervised Bluetooth Smart connection to provide two-way wireless communication with an alarm panel.  It is also the first touch pad to use e-link technology (similar to what used in Amazon Kindle) to provide real-time status updates. This low-power, high contrast display ensures easy reading in high & low light conditions.  The keypad itself uses capacitive touch delivering a sleek, clean finish for the customer.  Helipad has an expected battery life of 1 year on two AAA alkaline batteries that can be replaced by the customer.

Features • Secure, 4-digit Code to disarm • 1-button arming • Red/Green LED arming feedback • Small, yet comfortable keypad • Mounts on wall via VHB® tape, or screws • Secure for carrying in purse or mounting on car visor • Strong, reliable RF signal. • 4-6 year battery life on CR2032 battery.

Small door or window sensor. Can be used for anything that opens and closes. Support for an external contact. 1 inch magnet gap. Cover tamper. 6+ year battery life.  Note:  If you want an entry/exit delay on a door, please put “Delay” after the name of the door under Labels.

Great for large rooms or hallways, 60 pound Pet immunity. Mountable on flat wall, 45 degree corner. Unique external contact on separate wireless ID. 6-8 year battery life on 1-CR 123 Lithium battery. Cover Tamper.

Reliably identifies the sound of breaking glass when mounted from 4-25 feet from the source. Great for rooms with a lot of glass and even glass sliding doors. Delivers 4-6 year battery life.

Keyfobs give you simple arm and disarm of your security system.Full pivoting built-in key ring tangle-free storage. Strong, reliable RF signal. 4-6 year battery life, on A27 battery.

Portable device for emergency initiation of system. Single, red button with comfortable feel. Fully sealed, water resistant housing. Strong, reliable RF signal. “Heartbeat” LED blinks every minute to assure user. Comes with comfortable, elastic band and neck pendant. 4-6 year battery life.

The Temperature Range Detector RE605 senses changes in temperature to protect homes and offices from extreme heat or cold . It can be used for just Freeze, just Overheat or both simultaneously. It has an unique ID for each function. 8 to 10 year battery life on  CR123A battery.  Has a low battery indication.

Triggers at approximately 30 degrees tilt. Monitors any lifting or tilting door or equipment movement. Mount vertically in non-alarm position. Strong reliable RF signal. 10-15 year battery life CR123A battery. Low-battery indication.

The RE613 is a carbon monoxide detector delivering 70-400ppm detection meeting UL2034 specifications. With 3-5 year battery life, a long range sensor and built-in temporal 3 sounder, The RE613 provides maximum performance for your customers. 

The RE612 Smoke Detector is a highly reliable smoke detector with a photoelectric detection element and built-in temporal 3 sounder. Deliver 3-5 years of battery life, al long range transmitter and a detection element that is UL217 certified.

The Flood / Temperature Range Home Disaster Sensor RE619 helps protects home and office from Flood/Moisture, Freeze (for furance failure) and Overheat ( for furance runaway or air conditioning failure). 8-10  years battery life on CR123A battery. Low battery indication. Flood Alarm when liquid rises 0.040 inches above sensor bottom. Tamper when cover is opened. Supervisory signal to panel every hour. Freeze Alarm when room temperature drops below 40 degrees F.  Supervisory signal every hour. Overheat Alarm when room temperature rises above 100 degrees F. Supervisory signal every hour.

Remote Wireless Siren. Siren Cadence Synchronized to panel. Automatically follows panel beep volume. Wall-powered, with backup power on CR123A battery. Helix Supports up to 8 sirens. Cover tamper.

Help deter would be robbers with SNAP Window Decals - quantitiy 4

Note: Two window decals are provided with each initial order

The Driveway Sensor senses a Vehicles passing by. The Sensor continuously monitors the earth’s magnetic field. When the large metal mass of a vehicle drives by, the earth’s magnetic field is twisted. The sensor then transmits wireless signal to the control panel. The Driveway Sensor is immune to pets, wildlife, leaves, dust and sunlight. NO DIGGING ! Mounting hardware is a ground stake. Weatherproof design handles all environments. Strong, reliable RF signal and senses vehicles from 0 to 15 feet from unit.  Temperature Range 0 degrees F to 120 degrees F. Replacement Battery: Energizer C-Cell ( better than Panasonic. Battery Life is 3-5 years. See Technical Manual at  Support.

Help deter would be robbers with SNAP Yard Sign.

Note: One yard sign is provided with each initial order

The Z-Wave Thermostat (GC-TBZ48) is a programmable, Z-Wave communicating thermostat. It can be powered using 24VAC (if both R & C wires are available at the thermostat), or using four (4) AA batteries. Using Z-Wave technology, end users have the ability to use the Helix Automation Platform to control the thermostat, configure programming settings, as well as to display current conditions in the home or office. Features include: A fixed format display with white backlight.  Heating and Cooling setup display options. System mode ( OFF, Heat, Cool, Auto, E-Heat). Compatible with 24 VAC gas, oil or electric heating and air conditioning systems; or gas millivolt heating systems.  DO NOT USE ON 120 VAC SYSTEMS.

The LB60Z-1 Smart LED Light Bulb is simple to set up and provides longer life and more energy efficiency than incandescent or florescent light bulbs. The bulb is instant on, without the warm-up delay common in CFL bulbs. It conforms to the Z-Wave wireless protocol for remote home automation. Designed to enable two-way RF communication among hundreds of Z-Wave enabled devices, allowing products from different manufactures to work seamlessly together. Works as a network repeater to relay signals from controller to other Z-Wave devices. Power Supply 120 VAC, 60 Hz.  Brightness 750 lumens( Equivalent to 60 Watt incandescent light.  Power Consumption 9 Watts.  Bulb Lifetime 25,000 hours.  Radio Frequency 908.4 MHz/916 MHz.   Wireless Range Up to 130 feet line of sight between the Z-Wave Controller and the/or the closest Z-Wave Repeater. 

The LBR30Z-1 Smart LED Light Bulb is simple to set up and provides longer life and more energy efficiency than incandescent or florescent light bulbs. The bulb is instant on, without the warm-up delay common in CFL bulbs. It conforms to the Z-Wave wireless protocol for remote home automation. Designed to enable two-way RF communication among hundreds of Z-Wave enabled devices, allowing products from different manufactures to work seamlessly together. Works as a network repeater to relay signals from controller to other Z-Wave devices. Power Supply 120 VAC, 60 Hz.  Brightness 650 lumens( Equivalent to 65 Watt incandescent light.  Power Consumption 7.5.Watts  Bulb Lifetime 25,000 hours.  Radio Frequency 908.4 MHz/916 MHz.   Wireless Range Up to 130 feet line of sight between the Z-Wave Controller and the/or the closest Z-Wave Repeater. 

The LB65R6Z-1 Smart LED Recessed Retrofit Light Kit is designed to replace a conventional incandescent halogen downlight. It is simple to setup and provides longer life and more energy officiency than incandescent or florescent light bulbs. The fixture is instant on, without the warm-up delay common on CFL bulbs. The LB65R6Z-1 can be controlled ON/OFF/Bright/Dim through wireless signals from the Z-Wave remote controller or through a gateway via an application on a smart phone, tablet or PC. It can be manually operated using the wall switch while keeping it on- line with the Z-Wave network. Power Suppy: 120 VAC. Brightness: 650 lumens (equivalent to 65 Watt incandescent light bulb. Power Consumption: 8.5 Watts. Fixture Lifetime: 25,000 hours.  Radio Frequency: 908.4 MHz / 916 MHz. Wireless Range: Up to 130 feet line of sight between the Z-Wave Controller and/or the closest Z-Wave Repeater. Normal Operating Temperature: 77 Degree. F  ( 25 Degree C).

The Plug-in Appliance Switch PS15Z-2 conforms to the Z-Wave wireless protocol for remote home automation.Designed to enable two-way RF communication among hundreds of Z-Wave enabled devices, allowing products from different manufactures to work seamlessly together. Works as a network repeater to relay signals from controller to other Z-Wave devices. Power: 120 VAC, 60 Hz. Signal Frequency: 908.42 MHz. Maximum Load: Incandescent: 600W maximum, 120 VAC. Resistive: 15 AMPS (1800 watts). Motor: ½ H.P. maximum. 120 VAC.  Range: Up to 100 feet line of sight between the Controller and /or closest Z-Wave Receiver module.

The Plug-in Lamp Dimmer PD300Z-2  conforms to the Z-Wave wireless protocol for remote home automation. Designed to enable two-way RF communication among hundreds of Z-Wave enabled devices, allowing products from different manufactures to work seamlessly together. Works as a network repeater to relay signals from controller to other Z-Wave devices. Power: 120 VAC, 60 Hz. Signal Frequency: 908.42 MHz. Maximum Load: 300W, for incandescent lamps only. Note: A minimum of 20 Watts load is recommended for the “Load Sense” feature and dimming capabilities of this product to operate properly.  Range: Up to 100 feet line of sight between the Controller and/or closest Z-Wave Receiver module.

The Garage Door Opener Controller GD00Z-4 is a remote command transceiver with built-in Z-Wave technology. It allows operation of a garage door opener using Z-Wave controllers. The GD00Z-4 connects to the garage door opener’s  pushbutton wall console terminals. The kit also includes a wireless TILT sensor which mounts on the garage door and reports the door’s position to the Controller. A warning indicator light flashes and a beeper sounds for 5 seconds before the door begins to move. The Controller also acts as a Z-Wave repeater to improve communications within the Z-Wave mesh network.

Fixed Wi-Fi with IR night vision. Motion Detection. Ability to communicate with a wireless router without an Ethernet cable. Indoor use only. Comes with camera mounting bracket, outlet power supply and Ethernet cable.